Before proceeding to follow these instructions, please verify that your AmpliFi system is running the latest firmware and the mobile app is running the latest software. The IPv6 option can be enabled through the app or through the advanced web UI.
Note It is recommended to always upgrade to the newest release available. In the case of IPv6 configuration, it is necessary to be using as a minimum the following versions: AmpliFi router firmware v2.2.0 or later, iOS and Android App v1.6.0 or later.
Please follow these steps to locate and enable IPv6.
Via the AmpliFi app
1. Open your AmpliFi smartphone app.
2. Tap the image of the router to open the router's settings.
3. Select the "Internet".
4. Scroll down to "IPv6" and toggle this setting On. Once it is enabled it will be blue and have a drop down menu for further configuration.
5. Verify the corresponding Network Type.
- DHCPv6: This mode should be used in most cases. It requires native IPv6 connectivity from your Internet Service Provider (ISP). The "Client ID" field is used with the DHCPv6 protocol, but this is not a required field. If you need a Client ID, please contact your ISP in order to receive an IPv6 address.
- 6to4: This mode can be used when your ISP does not provide native IPv6 connectivity.
6. Tap the check mark on the top right corner to save your settings. If you encounter issues after following this guide, please see our Troubleshooting article.
Via the advanced web UI
1. Go to the web page http://amplifi.lan/ on a computer.
2. Once in the web page select your router and enter in the password.
3. You will see a list of options, select enable IPv6 and specify the network type
4. Verify corresponding Network Type
- DHCPv6: This mode should be used in most cases. It requires native IPv6 connectivity from your Internet Service Provider (ISP). The "Client ID" field is used with the DHCPv6 protocol, but this is not a required field. If you need a Client ID, please contact your ISP in order to receive an IPv6 address.
- 6to4: This mode can be used when your ISP does not provide native IPv6 connectivity.
5. Once set click save & continue on the bottom of the page
6. If you encounter issues after following this guide, please see our Troubleshooting article.