Follow these steps to enable a guest network. The guest network feature can not be enabled or configured from the router screen, it must be set using the AmpliFi app. In versions prior to v3.0.1, the guest network feature was not available if bridge mode was enabled. If you are using bridge mode and the guest network is not working, please update to newest version available to fix the issue. Currently you cannot select what band (2.4GHz or 5GHz) the Guest Network works on. To perform that type of configuration, check out this "Additional SSID" feature.
Note The guest network utilizes client isolation to protect your personal network from guest access.
1. Launch the AmpliFi app.
2. Select the Guest tab.
3. Establish how many guests you will allow to connect at one time (1 to infinite).
4. Set a time limit for how long they will have access to your network (set before tapping start for iOS devices).
5. Tap Start. Your guest network is now active (for android users this is where the duration will be set).
Tip The buttons around the Start button add more functionality. You can Share your guest network with friends and family. You can toggle your guest network to be infinitely turned on by selecting Always on. Also, you can view and customize the guest network under Settings.